| U型槽模具的特点 |
| 添加时间：2017/6/1 14:11:59 浏览次数： |
| U型槽模具轻质:易搬运、易托工、方便变电站、电厂室内外沟道的检修与清理。韧性好(便于维修):在检修维护清理时,可任意掀动,很好的保证了盖板外观的完整性。模具美观:用统一玻璃钢模具一次浇注成型 Light quality of u-groove mold: easy to handle, easy to handle, convenient substation, the repair and cleaning of the channel inside and outside the power plant. Good toughness (easy to repair) : when maintenance and cleaning, can be arbitrarily lifted, good guarantee the integrity of the flat surface. The mould is beautiful: use the uniform glass steel mould to pour the injection molding ,故表面光滑规整,尺寸统一。易施工:由于其材料的特殊性,且用新型承重材料代替了钢筋,实现了可钉、可刨、可任意切割。建丰U型槽模具抗溶性、抗老化性能力强、使用寿命长。U型槽模具使用后应该贮存在常温干燥的室内,防止放在潮湿的地方,防止出现裂痕,从而影响U型槽模具质量;在进行堆放时,应该注意高度不能超过2.3米, Therefore, the surface is smooth and neat and uniform in size. Easy construction: because of the particularity of its material, and replace the steel reinforcement with new-type load-bearing material, it can be nailed, planed and cut freely. Jianfeng U groove mould is anti-soluble, anti-aging ability and long service life. The u-shaped mold should be stored in the dry room at room temperature and prevent the cracks in the wet area, thus affecting the quality of the groove mold. In the case of piling up, the height should not exceed 2.3 meters, 还要避免重压和挤压,防止模具变形,模具不能和有害气体放一起,还要避免热源。 Also avoid the pressure and pressure, prevent the mold from deforming, the mould cannot be put together with the harmful gas, and also avoid the heat source. |
| 上一页 模具力求与时代同步进行发展 |
| 下一页 U型槽模具生产工艺 |
Copyright © 技术支持：遨游网络